管壁开孔足尺钢管混凝土柱抗震性能试验研究          下载免费PDF全文

马华  李美娜  王倩倩  王文静  李振宝  陈海燕 《世界地震工程》2019,35(1):053-61

针对钢筋混凝土梁与钢管混凝土柱的穿筋连接形式，研究了钢管开穿筋小孔及加固对钢管混凝土柱抗震性能的影响。对于未开孔、开孔和开孔并加固三种情况，进行了3个直径为610 mm的足尺钢管混凝土柱试件的低周反复荷载试验。试验结果表明:未开孔试件在距根部100 mm处发生钢管屈曲破坏；开孔试件的破坏主要是开孔处屈曲撕裂，开孔对钢管混凝土柱初期刚度和峰值承载力影响不大，但在峰值承载力后受孔边撕裂破坏影响，开孔试件的刚度和强度退化较快、延性和耗能能力降低；开孔并加固试件的破坏位置上移至加固段上部约90 mm处，与未开孔试件表现出相似的抗震性能。  相似文献   

大跨度钢管混凝土拱桥抗震性能指标研究          下载免费PDF全文

夏修身  杜骞  戴胜勇 《世界地震工程》2019,35(1):110-116

高轴压比钢管混凝土墩柱的试验结果对钢管混凝土拱肋具有较大的借鉴意义。为明确大跨度钢管混凝土拱桥的抗震性能指标，研究了高轴比钢管混凝土构件的破坏过程及延性性能。以弯矩作为性能指标将高轴压比钢管混凝土构件的试验破坏过程分为轻微损伤、有限损伤与严重损伤3个阶段，结合钢管混凝土截面性能状态的数值分析，探讨了高轴压比钢管混凝土构件的破坏机理。结果表明:高轴压比钢管混凝土构件具有一定的可用延性；提出了以计算等效屈服弯矩作为抗震性能指标，适当利用延性和实现钢管混凝土拱桥的有限损伤抗震设计，并给出了与有限损伤相关的截面性能状态及参数。研究成果弥补了规范在此方面的不足，可供高烈度地震区大跨度钢管混凝土拱桥抗震设计时参考。  相似文献   

Intra-survey reservoir fluctuations – implications for quantitative 4D seismic analysis     

Veronica Omofoma  Colin MacBeth  Hamed Amini 《Geophysical Prospecting》2019,67(2):282-297

During the time taken for seismic data to be acquired, reservoir pressure may fluctuate as a consequence of field production and operational procedures and fluid fronts may move significantly. These variations prevent accurate quantitative measurement of the reservoir change using 4D seismic data. Modelling studies on the Norne field simulation model using acquisition data from ocean-bottom seismometer and towed streamer systems indicate that the pre-stack intra-survey reservoir fluctuations are important and cannot be neglected. Similarly, the time-lapse seismic image in the post-stack domain does not represent a difference between two states of the reservoir at a unique base and monitor time, but is a mixed version of reality that depends on the sequence and timing of seismic shooting. The outcome is a lack of accuracy in the measurement of reservoir changes using the resulting processed and stacked 4D seismic data. Even for perfect spatial repeatability between surveys, a spatially variant noise floor is still anticipated to remain. For our particular North Sea acquisition data, we find that towed streamer data are more affected than the ocean-bottom seismometer data. We think that this may be typical for towed streamers due to their restricted aperture compared to ocean-bottom seismometer acquisitions, even for a favourable time sequence of shooting and spatial repeatability. Importantly, the pressure signals on the near and far offset stacks commonly used in quantitative 4D seismic inversion are found to be inconsistent due to the acquisition timestamp. Saturation changes at the boundaries of fluid fronts appear to show a similar inconsistency across sub-stacks. We recommend that 4D data are shot in a consistent manner to optimize aerial time coverage, and that additionally, the timestamp of the acquisition should be used to optimize pre-stack quantitative reservoir analysis.  相似文献   

基于区域监测站的BDS定轨策略分析     

王乐  黄观文  张勤  燕兴元  秦志伟  王利  崔博斌 《大地测量与地球动力学》2018,38(5):497-503

围绕影响轨道精度和实时性的5个要素（模糊度分类固定、测站数量、定轨弧长、太阳光压模型和多系统组合）展开研究，得出区域测站分布下的定轨优选策略。实验表明，选取中国区域27个均匀分布的地面区域监测站，利用72 h弧长观测数据，采用ECOM 5参数简化太阳光压摄动模型、BDS/GPS双系统联合定轨可达到较好的精度，其中GEO卫星轨道精度约291 cm，IGSO/MEO卫星轨道精度优于11 cm。若BDS单系统采用上述策略进行定轨，也可达到GEO卫星299 cm和IGSO/MEO卫星14.4 cm的近似等价定轨精度。  相似文献   

基于EEMD-SARIMA的对流层延迟预测模型研究     

任超  刘中流  梁月吉  甘祥前 《大地测量与地球动力学》2018,38(9):953-957

在无气象数据的条件下，提出一种基于集合经验模态分解（EEMD）和季节性自回归移动平均模型（SARIMA）的对流层延迟（ZTD）预报新方法，并分别选取长春、上海、乌鲁木齐3个地区4个季节的ZTD数据进行预测分析。结果表明，基于EEMD-SARIMA的ZTD改正预报模型能够满足不同地区、不同季节下的ZTD估计需求，是一种高精度的ZTD预报方法。  相似文献   

GPS约束下陇西地区断裂带现今滑动速率的非连续接触模拟研究     

孟庆筱  景鹏旭  何申海  党学会 《大地测量与地球动力学》2018,38(12):1227-1231

以中国地壳运动观测网络1999、2001、2004和2007年4期GPS观测数据为边界条件，使用非连续接触有限元技术构建陇西块体二维有限元模型，在摩擦系数不确定性分析基础上，计算区内主要断裂带滑动速率。结果表明，现今地壳形变运动状态下陇西块体的北东向运动在海原断裂附近受到鄂尔多斯块体、阿拉善块体阻碍，陇西块体周缘的海原断裂带、老虎山断裂、西秦岭北缘断裂呈现左旋走滑特征，滑动速率为3.5 mm/a、2.2 mm/a和1.9 mm/a，说明在青藏高原推挤作用下以上关键部位正在进行快速的构造应变积累。  相似文献   

Galileo广播星历评估及其对定位精度的影响     

韩德强  党亚民  庞辉  薛树强  杨强  张龙平 《大地测量与地球动力学》2018,38(11):1165-1169

分析现阶段伽利略空间信号的精度，并评估伽利略广播星历及其对单点定位的影响。统计30 d健康卫星广播星历，结果表明，FOC和IOV两种类型的广播星历卫星轨道误差优于0.8 m，并且径向误差最小，法向误差次之，切向误差最大；伽利略卫星的钟差误差精度达到1.0 ns；从空间信号测距误差对伽利略卫星进行整体分析，广播星历精度优于1.0 m，FOC与IOV卫星精度相当；用广播星历进行事后单点定位的精度可以达到dm级。  相似文献   

钢管脐带缆扭转平衡设计     

牛学超  祝庆斌  潘盼  邵鹏进  胡明  谢书鸿 《海洋工程》2020,38(6):151-157

钢管脐带缆包含多种螺旋缠绕的功能单元，其在外力载荷下会发生相对运动，而且钢管的刚度较大对扭转平衡有重要影响，因此，相对于普通电缆，钢管脐带缆在扭转平衡设计时更加困难。根据扭转平衡理论公式，采用控制变量法，以第二层铠装钢丝的绞合角度为变量进行扭转平衡设计。首先建立脐带缆缆芯有限元模型，对其施加拉伸载荷，结果显示缆芯出现了扭转，这证明不能将脐带缆缆芯视为一实心圆柱。其次建立不同绞合角度的脐带缆有限元模型，设置各功能单元的材料属性和摩擦系数，分析模型在拉伸载荷下的扭转角度，并将相同拉伸载荷下的扭转角度拟合为直线，从而得到钢管脐带缆在扭转平衡状态时的最优绞合角度。最后，采用试验方法对实物钢管脐带缆进行扭转平衡测试，测试结果显示在拉伸载荷下脐带缆单位长度扭转角度十分微小，这表明缆是扭转平衡的。因此验证了使用的有限元方法在钢管脐带缆扭转平衡设计中的有效性。  相似文献   

近景摄影测量支持下的地铁盾构管片姿态测量方法及其应用     

徐洲洋  肖东升 《测绘通报》2019,(1):75-78,143

传统的地铁盾构管片姿态测量的方法存在作业时间长，与施工流水线交叉作业劳动量大，且无法实时测量等不足。本文提出了利用近景摄影测量的方法对盾构管片姿态进行测量，通过在盾构管片环上铺设人工标志点，使用数码相机进行拍摄，利用光束法平常对摄影图片进行数据解算，得到解算标志点坐标后，再根据空间三点定圆心原理确定盾构环圆心点的坐标。试验结果表明，对比传统测量方法，新方法误差不超过3 cm，能够完全满足盾构管片姿态的测量精度要求，具有很好的推广价值。  相似文献   

Development of detachable replaceable links for eccentrically braced frames     

Mehmet Bakır Bozkurt  Sina Kazemzadeh Azad  Cem Topkaya 《地震工程与结构动力学》2019,48(10):1134-1155

Eccentrically braced frames (EBFs) can be repaired after a major earthquake by replacing the links. The link replacement is not a straightforward process and is influenced by the type of the link and the amount of residual frame deformations. The past decade has witnessed the development of different types of replaceable links such as end-plated links, web connected links, bolted flange and web spliced links, and collector beam and brace spliced links. All of the developed replaceable link details, except the web connected links, are not suitable for link replacement under residual frame drift. In this paper, a detachable replaceable link detail which is based on splicing the link at its mid-length is proposed. The detail is well suited for installation under residual frame drifts. In addition, the weight and size of the members to be transported and erected are reduced significantly, thereby facilitating the replacement procedure. Performance of this proposed replaceable link is studied by conducting six nearly full scale EBF tests under quasi-static cyclic loading. The link length ratio, type of end-plated mid-splice connection, and the amount of residual drift are considered as test variables. The test results revealed that the inelastic rotation capacity of the detachable replaceable links exceeds the requirements of the AISC Seismic Provisions for Structural Steel Buildings. No failures are observed in the end-plated mid-splice connections demonstrating the potential of the proposed details. The detachable replaceable links are investigated by numerical analysis as well to further validate their applicability and to develop design recommendations.  相似文献